MIDRON O/TB - Gloves impregnated with a layer of nitrile.

midron_otb
Available sizes: 8-9-10. CE marking : This type of glove has undergone an EC type examination by a body authorized on the basis ofEuropean Standards EN 420 and EN 388.CE marking affixed to this glove means compliance with the essential requirements of the DirectiveEuropean Union concernin ...Read more



Downloads Technical sheet
  • Description
  • Specifications

Available sizes:

8-9-10.

CE marking :

This type of glove has undergone an EC type examination by a body authorized on the basis of
European Standards EN 420 and EN 388.
CE marking affixed to this glove means compliance with the essential requirements of the Directive
European Union concerning personal protective equipment (E P I).
safety, comfort and dexterity level 5.

Pictogram and performance levels: see opposite.
This product has been designed to provide protection against MECHANICAL HAZARDS such as
the pictogram below affixed to the back of the glove.

This pictogram is followed by the levels of protection offered against the types of
risks covered:

  • Level 4 abrasion resistance
  • Cut resistance level 2
  • Level 1 tear resistance
  • Level 1 perforation resistance

Cleaning and maintenance :
New gloves and gloves used should be examined thoroughly before use and
after cleaning to ensure that the glove has no defects. Gloves can not
remain in a polluted state if they are intended for reuse. In this case, the gloves must be
cleaned before removing them from the hand as long as it is safe.
Clean the gloves with a mild detergent, then rinse with pure water and finally dry them in full
air. When impurities can not be removed, it is advisable to remove the right glove and
the alternating left glove, still using the gloved hand so that the bare hand does not fit
not in contact with impurities.

Storage and packaging:
The gloves are packed in packs with this leaflet. The packages are made of cardboard,
adapted for transport. Store gloves in dry places away from sunlight.

Period of conservation:
Provided that the storage is correct, the physical characteristics do not
will not change the first five years.

Generalities:
The quality system used in the production of gloves is in accordance with ISO 9002.
None of the raw materials or processes used in the production of gloves are known
as harmful to the user.

Certificate of conformity issued by: C.T.C - 4, rue HERMANN FRENKEL - 69367 LYON N ° 0075

 

 

 

                                  
Support Services      Quality Garanteed    European Standards