MIDRON TB - Safety glove impregnated with nitril.

Marking:
BUSTERS, Midron TB, SIZE and CE

Available gloves sizes:
Reference Glove size according to EN420 Glove size: 10
16-2186
10 10

Security Category:

Mechanical characteristics according to EN 388.
Level 4 abrasion resistance
Cut resistance level 2
Level 2 tear resistance
Level 1 perforation resistance

Cleaning and maintenance :
New gloves and gloves used should be examined thoroughly before use and
after cleaning to ensure that the glove has no defects. Gloves can not
remain in a polluted state if they are intended for reuse. In this case, the gloves must be
cleaned before removing them from the hand as long as it is safe.
Clean the gloves with a mild detergent, then rinse with pure water and finally dry them in full
air. When impurities can not be removed, it is advisable to remove the right glove and
the alternating left glove, still using the gloved hand so that the bare hand does not fit
not in contact with impurities.

Period of conservation:
Provided that the storage is correct, the physical characteristics will not change the first five years.
generalities.
The quality system used in the production of the gloves is in accordance with ISO 9002. None of the materials
raw materials or processes used in the production of gloves are known to be harmful to the user.

Note :

The protection of the hand is limited to the impregnated parts of the glove. The information mentioned above has
to assist the user in the selection of personal protection equipment. Test results
physical and chemical properties should help in the selection of the glove, although it must be taken into account that the conditions
current usage patterns can not be simulated and it is the responsibility of the user - not the
manufacturer - to determine the fit of the glove for the specific use.