1545/150 PA CH 5 finger gloves, handmade in natural full grain goat

1545150pach
Stitched 100% aromatic polyamide thread Nm 50/4.Total length approximately 355 mm (size 08).Available sizes: 08 to 11. Recommendations: HANDLING OF METALLIC PARTS OR HOT PLATE PLATES,WELDING PROCESSES REQUIRING CERTAIN DEXTERITY CE marking: This type of glove has undergone an EC type exami ...Read more



  • Description
  • Specifications

Stitched 100% aromatic polyamide thread Nm 50/4.
Total length approximately 355 mm (size 08).
Available sizes: 08 to 11.

Recommendations: HANDLING OF METALLIC PARTS OR HOT PLATE PLATES,
WELDING PROCESSES REQUIRING CERTAIN DEXTERITY

CE marking: This type of glove has undergone an EC type examination by a body authorized on the basis of
European Standards EN 420, EN 388 and EN 407 and EN 12477 type B.
CE marking affixed to this glove means compliance with the essential requirements of the Directive
European Union concerning personal protective equipment (E P I).
- Safety, we declare that this PPE contains no allergenic substance known to date. Her
design causes no irritation or no gene to the wearer. It does not currently exist
standardized test method for detecting UV penetration through the materials used
in gloves, but current methods of designing protective gloves for welders
do not allow UV penetration.
Arc welding equipment does not protect the welder from direct contact with
all parts live.
- Level 5 comfort and dexterity.

Pictograms and performance levels:

This product has been designed to provide protection against LA
HEAT AND FIRE as indicated by the pictogram
opposite affixed to the back of the glove.

Performance levels for thermal hazards:
* Fire behavior: 4/4
* Heat of contact: 1/4
* Convective heat: 1 / 4
* Radiant heat: 2 / 4
* Small splashes of liquid metal: 4/4
* Large splashes of molten metal: X / 4
This product has been designed to provide protection against
MECHANICAL HAZARDS as indicated by
pictogram above affixed to the back of the glove.

Performance levels for mechanical hazards:
* Abrasion: 2/4
* Cut: 1/5
* Tear: 2/4
* Perforation: 1/4

Levels: The highest number represents the best protection.
Performance levels are only guaranteed on the palm of the glove and not on the cuff.
Protective limits: Do not use for handling objects with a temperature above 100 ° C.
Do not use for handling chemicals or liquids.
Gloves do not provide protection against electric shocks caused by
defective electrical equipment or live work, and the electrical resistance is
reduced if the gloves are wet, dirty or sweat-soaked.

Maintenance and storage: No special maintenance is recommended.
It is advisable to store the products in a place protected from light, cool, dry and ventilated.

Certificate of conformity issued by: LEITAT (Espagne) n°0162


 

                                  
Support Services      Quality Garanteed    European Standards